﻿<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE article PUBLIC "-//NLM//DTD JATS (Z39.96) Journal Archiving and Interchange DTD v1.2 20190208//EN" "JATS-archivearticle1.dtd"[]>
<article xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink" dtd-version="1.2" article-type="research-article">
  <front>
    <journal-meta>
      <journal-id journal-id-type="publisher-id">ijese</journal-id>
      <journal-title-group>
        <journal-title>Interdisciplinary Journal of Environmental and Science
Education</journal-title>
      </journal-title-group>
      <issn publication-format="electronic">2633-6537</issn>
      <publisher>
        <publisher-name>Modestum</publisher-name>
      </publisher>
    </journal-meta>
    <article-meta>
      <article-id pub-id-type="doi">10.29333/ijese/14073</article-id>
      <title-group>
        <article-title>Art and design entanglements for renewable energy
education: Renewable energy art and design approach</article-title>
      </title-group>
      <contrib-group>
        <contrib contrib-type="author">
          <contrib-id contrib-id-type="orcid">0000-0001-7792-6686</contrib-id>
          <name>
            <surname>Soares</surname>
            <given-names>Paulo Henrique</given-names>
          </name>
          <xref ref-type="aff" rid="aff-1" />
          <xref ref-type="aff" rid="aff-2" />
        </contrib>
        <contrib contrib-type="author" corresp="yes">
          <contrib-id contrib-id-type="orcid">0009-0008-9417-8446</contrib-id>
          <name>
            <surname>Kang</surname>
            <given-names>Mihyun</given-names>
          </name>
          <email>mkang@psu.edu</email>
          <xref ref-type="aff" rid="aff-1" />
          <xref ref-type="corresp" rid="cor-true">
            <sup>*</sup>
          </xref>
        </contrib>
        <contrib contrib-type="author">
          <contrib-id contrib-id-type="orcid">0009-0003-8928-8126</contrib-id>
          <name>
            <surname>Choo</surname>
            <given-names>Phil</given-names>
          </name>
          <xref ref-type="aff" rid="aff-1" />
        </contrib>
        <aff id="aff-1">
          <label>1</label>
          <institution-wrap>
            <institution>The Pennsylvania State University, University Park, PA,
USA</institution>
          </institution-wrap>
        </aff>
        <aff id="aff-2">
          <label>2</label>
          <institution-wrap>
            <institution>New Zealand Electricity Authority, Wellington, NEW
ZEALAND</institution>
          </institution-wrap>
        </aff>
      </contrib-group>
      <pub-date date-type="pub" publication-format="electronic" iso-8601-date="2023-12-27">
        <day>27</day>
        <month>12</month>
        <year>2023</year>
      </pub-date>
      <volume>20</volume>
      <issue>1</issue>
      <elocation-id>e2401</elocation-id>
      <permissions>
        <copyright-statement>Copyright © 2024 by Author/s and Licensed by
Modestum DOO, Serbia.</copyright-statement>
        <copyright-year>2024</copyright-year>
        <license license-type="open-access" xlink:href="http://creativecommons.org/licenses/by/4.0/">
          <license-p>This is an open access article distributed under the Creative
Commons Attribution License which permits unrestricted use,
distribution, and reproduction in any medium, provided the original work
is properly cited.</license-p>
        </license>
      </permissions>
      <abstract>
        <p>
The ongoing energy transition presents a necessary shift towards
renewable sources, such as wind and solar power, in the face of the
challenges presented by the changing climates. This change, however,
requires an understanding of the operation of renewable energy systems.
In other words, the shift towards clean energy generation demands
education. By combining art, design, and renewable energy education the
renewable energy art and design (READ) approach provides a path for
renewable energy education. READ approach is a customizable and flexible
process developed to enable the creation of solar-powered devices while
sharing knowledge on diverse subjects such as art, design, electronics,
electricity, and computer science. Due to its versatility, READ is
expected to enhance energy education and contribute to the transition
towards a renewable-powered society.
</p>
      </abstract>
      <kwd-group kwd-group-type="author">
        <kwd>renewable energy</kwd>
        <kwd>energy education</kwd>
        <kwd>art &amp; design</kwd>
        <kwd>electronics</kwd>
        <kwd>steam</kwd>
        <kwd>sustainability</kwd>
      </kwd-group>
    </article-meta>
  </front>
  <body>
    <sec id="introduction">
      <title>INTRODUCTION</title>
      <p>The ongoing change in climate requests us to adapt and act, as
  highlighted by the latest report published by the intergovernmental
  panel on climate change (IPCC). To limit the adverse impacts of
  climate change it is crucial to decrease anthropogenic CO<sub>2</sub>
  emissions, most of which are due to the burning of fossil fuels (IPCC,
  2022). Traditionally CO<sub>2</sub> emissions from fossil fuels are
  associated with two sectors, energy generation and transportation,
  which usually rely heavily on fuels such as coal, oil (i.e.,
  non-renewable liquid fuels), and natural gas. Worldwide, the emissions
  from these two sectors are expected to decrease, due to the
  electrification of the transportation sector, and the widespread
  adoption of renewable energy sources (Dale, 2023). Such a transition
  away from fossil fuels is already happening, as more electric vehicles
  hit the road, and the use of coal and oil for electricity generation
  is decreasing (IEA, 2022)</p>
      <p>It is also expected that solar and wind, two clean energy sources,
  become even more ubiquitous since they are already more economically
  viable than traditional fossil-based sources (EIA, 2021). Solar
  energy, for instance, is already blended with urban settings across
  the globe, and its adoption has been growing consistently over the
  years worldwide (REN21, 2022). The growth in adoption, however, may
  not be enough to create a social understanding of how renewable energy
  works. For instance, Kishore and Kisiel (2013) found that young
  students tend to know what solar photovoltaic (PV) systems are, but
  they generally do not understand their operation. This indicates a
  possible educational gap, which, if left unfilled, might cause delays
  in the adoption of renewable energy sources, thus possibly slowing
  down the needed response to climate change. Perhaps even worse is the
  fact that the education gap can lead to misinformation and
  not-in-my-backyard (NIMBY) reactions (Rai &amp; Beck, 2015; van der
  Horst, 2007). Energy education is therefore essential to prepare our
  society for the ongoing energy transition. However, as Lowan-Trudeau
  and Fowler (2022) pointed out, energy education is still entangled
  with colonial practices and fossil fuel perspectives. We propose a
  path for renewable energy education based on Freirean practices and
  climate change perspectives. Our path resides in developing
  solar-powered educational devices through the entanglement between
  environmental awareness, modern electronic devices, art, and design,
  resulting in the renewable energy art and design (READ) approach.</p>
      <p>Despite many possible educational paths, one involving sensations
  of touch and active involvement, more than just vision, enables a
  deeper connection with the subject matter (Haury &amp; Rillero, 1994).
  And since solar energy is modular–the size of the system does not
  change its main characteristics–building knowledge through touching
  and assembling small-scale solar-powered devices has the potential to
  promote a strong understanding of the subject. We developed our
  practices to be implemented in various learning environments
  beyond–but without excluding–the classroom environment as long as the
  knowledge is shared in a way that the instructor becomes endogenous to
  the group, an element that receives and shares knowledge, inspired by
  the work of the Brazilian pedagogue Freire (1967), and by the concept
  of science as social knowledge (Longino, 1990).</p>
      <p>Furthermore, often when dealing with a group of students, this
  group is a collective set of elements with a diverse background -thus
  the teaching practices should be inclusive to resonate with as many
  people as possible. That is, where art plays a major role in renewable
  energy education: it promotes new experiences and different angles to
  look at subjects. For instance, solar PV systems might be perceived as
  strange rectangular shapes, mysteriously capable of generating power
  (Dimitrokali et al., 2015). The service that solar energy conversion
  systems provide (electricity or heat) is invisible to the
  eye–different from other power sources, where movement is always
  present. Through art, we can change the rectangular shape of solar
  panels into other angular or organic shapes and forms, such as the
  ones found in nature to which the public might pay more attention. We
  consciously developed READ approach with natural elements in mind,
  using nature around us (e.g., flowers, insects) as inspiration for our
  designs. Thus we purposedly tried to break the barriers associated
  with traditional engineering, hoping to invite more people to discover
  and intra-act with READ systems (Barad, 2007; Rautio et al.,
  2022).</p>
      <p>Art and energy have a long history of intersectionality as the
  latter has propelled human endeavours since its infancy. The discovery
  of fire is perhaps the earliest of such intersections, but its
  consequences are still present in our society through activities such
  as agriculture and cooking (Pyne, 2012; White, 1943; Wrigley, 2013).
  It also allowed people to represent their world in the form of
  primitive cave paintings (Marchant, 2016). Descriptions of harvests,
  farm animals, and sailboats were common among the ancient Egyptians,
  Greeks, and Romans (Chatterton, 2010). The ancient civilizations also
  had energy deities, such as the Anemoi or Venti, the gods of wind for
  the Greek and Roman mythologies, whom they revered (British Museum, n.
  d.). In more recent times, in 1839, Joseph Mallord William Turner
  painted <italic>The Fighting Temeraire</italic>, a metaphor for the
  decline of the sailboat and the rise of the faster steamboat (Lord,
  2014; Sullivan, 2021). In short, the functioning of human society is
  entangled with the history of energy and the many transitions that are
  part of it. However, besides energy, our society is experiencing a
  climate transition that can impact essential services and natural
  processes (Ornes, 2018; Schiermeier, 2018; Serdeczny et al., 2017).
  These challenges demand action from all sectors of our society.</p>
      <p>Dealing with complex and systemic challenges such as energy
  transition and climate change demands effective solutions. Thus, it is
  fundamental to have people well-trained in the diverse forms of
  renewable energy generation (Kandpal &amp; Broman, 2014; Negro et al.,
  2012) and who understand the importance of this energy transition to
  the continuity of life on earth. Energy education, despite often
  lacking a broad systemic approach (Ciriminna et al., 2016; Jorgenson
  et al., 2019), is fundamental for developing solutions and group
  thinking about the subject. To be effective, energy education should
  be presented within a sociotechnical innovation context tied to the
  environment (Hasnain et al., 1998; Jorgenson et al., 2019; Kandpal
  &amp; Broman, 2014). Moreover, energy education should propel the
  interest for collective action, through programs dedicated to
  renewable energy (Ciriminna et al., 2016), or by occupying spaces that
  can be used for knowledge sharing. In this process, innovative tools
  and approaches can aid the learning process by creating interactions
  and discussions between learners and educators. Furthermore, for
  younger audiences, tools that enable the possibility of a hands-on
  experience can significantly enhance their learning experience
  (Mylonas et al., 2019).</p>
      <p>READ approach was thought for hands-on education hoping to address
  some of the challenges of energy education. The purpose is to guide
  the construction of versatile solar-powered devices for renewable
  energy education, tied to a climate change context, through the form
  of art and design. The approach is based on customizable structures
  that can be easily deployed through fusion deposition modelling (3D
  printing). Moreover, READ promotes the use of electronic parts based
  on their availability and ease of assembly, aiming to lessen the time
  spent building the models, which makes READ suitable for discussions
  on topics other than renewable energy or climate change, such as art,
  design, electronics, electricity, and computer science.</p>
    </sec>
    <sec id="materials-and-methods">
      <title>MATERIALS AND METHODS</title>
      <p>READ approach is intended for rapid implementation, having clear
  goals for each development stage, following principles taken from
  system engineering (Wasson, 2015). The approach dialogues with
  subjects such as electronics, additive manufacturing (i.e., 3D
  printing), and computer programming. <bold><xref ref-type="fig" rid="figure-4506">Figure 1</xref></bold> illustrates
  the steps taken to develop the approach.</p>
      <p>For coherence purposes, the remainder of this discussion follows
  the steps listed in <bold><xref ref-type="fig" rid="figure-4506">Figure 1</xref></bold>.</p>
      <sec id="preliminary-design">
        <title>Preliminary Design</title>
        <p>The preliminary design phase began with the definition of the
    main educational purpose of READ device. (e.g., the functioning of
    PV systems or the importance of renewable energy for lowering the
    impacts of climate change, etc.). In this step we also defined the
    learning outcomes and the form of student engagement, opting to
    maximize the hands-on experience for the students, who should be
    able to describe and understand the outcomes of the approach–the
    renewable energy-powered educational devices (READ systems, or READ
    tools), and the functioning of the educational tools. In our case,
    since the goal was to use READ system to teach students about solar
    PV energy, the preliminary design followed the logic of PV systems
    as described by Brownson (2013). Finally, we developed the concept
    of the operations of READ systems.</p>
      </sec>
      <sec id="electronic-parts-selection">
        <title>Electronic Parts Selection</title>
        <p>Following the preliminary design step, READ approach moved
    towards more practical steps, beginning with the selection of the
    electronic components. We selected the electronic parts based on
    requirements such as:</p>
        <list list-type="order">
          <list-item>
            <p>
              <bold>Affordability:</bold> Low-cost sensors and other
        electronic components were preferred to minimize the cost.</p>
          </list-item>
          <list-item>
            <p>
              <bold>Availability:</bold> We preferred components available
        for purchase in multiple stores (or e-stores).</p>
          </list-item>
          <list-item>
            <p>
              <bold>Easiness of integration:</bold> We preferred components
        that were relatively easy to integrate with the remaining parts
        of the system.</p>
          </list-item>
        </list>
        <p>We included the first two items to ensure that the replicability
    of READ approach. Since we want READ to become a tool for renewable
    energy education, minimizing the cost and using parts that are
    relatively easy to find might facilitate the adoption of the
    approach. Moreover, since the system operation, rather than the
    system assembly, is the focus of the approach, we opted for a
    relatively easy assembly process. Finally, we required the system to
    run for about three hours without sunlight (provided the battery was
    fully charged). To achieve that, we had to consider the power
    consumption of the electronic parts of the system and choose a
    battery capable of delivering the power needed for the system to
    operate according to the expected running time. The three-hour of
    system runtime was agreed upon based on the anticipation that at
    some point we would expect to showcase READ approach, which could
    potentially involve indoor environments.</p>
        <p>The electronic components used in the development of READ
    approach are listed in <bold><xref ref-type="table" rid="table-7">Table 1</xref></bold>.</p>
      </sec>
      <sec id="enclosure-design-printing">
        <title>Enclosure Design &amp; Printing</title>
        <p>Once defined the size and type of the electronic components are,
    the next step in the process was the design of the enclosure for the
    electronic components. To assist with the design process we used
    Autodesk Fusion 360, a computer-aided design (CAD) modelling tool,
    due to its reasonably smooth learning curve, high-quality outcomes,
    and the fact that Autodesk provided free access to the tool for
    educators. The tool can also render the design, enabling us to have
    a fairly accurate sense of the physical shape and general aesthetics
    of the models.</p>
        <p>After we concluded the digital design of the models, we used
    fusion deposition modelling (aka 3D printing) for prototyping since
    it’s a relatively fast and affordable way to create physical
    designs; 3D printing enabled us to print multiple versions of the
    models in a matter of hours, thus adding flexibility to the design
    process (easy to reiterate through the steps, if needed). We used
    the Ultimaker Cura software to translate the digital CAD design to
    the 3D printing file format (a process known as “slicing”) and the
    Crealty CR-6 SE 3D printer for prototyping the models.</p>
      </sec>
      <sec id="system-assembly-system-testing">
        <title>System Assembly &amp; System Testing</title>
        <p>As the name suggests, the system assembly and the system design
    phases are related to the testing of the physical models. In our
    case, this phase happened more than once since often the models
    required further adjustments that could not be captured in earlier
    stages. Thus, the steps were an opportunity to refine the design of
    the tools. The two phases proved to be a valuable opportunity to
    ensure that the initial requirements set in the previous steps of
    the approach were met (such as the system running time, for
    instance) and that the parts fit together. Both the system assembly
    and the system testing phases were valuable teaching opportunities,
    as will be further discussed in the following section.</p>
      </sec>
    </sec>
    <sec id="results-and-discussion">
      <title>RESULTS AND DISCUSSION</title>
      <sec id="preliminary-design-1">
        <title>Preliminary Design</title>
        <p>During the preliminary design phase, we developed the concept of
    operations of READ systems, based on the initial considerations (and
    requirements), as shown in <bold><xref ref-type="fig" rid="figure-4507">Figure 2</xref></bold>.</p>
        <p>The systems were composed of five main blocks: a power source (PV
    cells), sensors (mainly light sensors), control unit, storage
    (battery) and services (mainly light). As shown in <bold><xref ref-type="fig" rid="figure-4507">Figure 2</xref></bold>, the control unit and battery were designed to be
    completely enclosed within READ systems, while sensors, the power
    source, and services are located at the interface between the
    systems and their surroundings. We purposely have a box labelled
    “other services” in our concept of operations, representing
    electronic components other than light that could be incorporated
    into the system at a later stage, if needed–thus we designed with
    flexibility in mind.</p>
        <p>It is worth mentioning that the preliminary design step was
    developed with the students rather than for the students. Thanks in
    part to the fact that the university has an undergraduate solar
    energy club, we connected with the students in this club and invited
    them to engage in the development of READ systems after we had our
    goals defined. The feedback we heard from these students was that
    having clearly defined goals and expectations, contributed to their
    understanding of what they were supposed to achieve, and the
    importance of their participation. We noticed that the
    responsibility of being part of the development of the project
    encouraged the students to proactively participate in the remaining
    steps of the process.</p>
      </sec>
      <sec id="electronic-parts-selection-1">
        <title>Electronic Parts Selection</title>
        <p>This step of READ approach served different purposes. First, at
    the beginning of this step, we developed a timeline for developing
    READ systems (and the remaining steps of the approach)–a necessary
    step that would likely fit better with the previous stage of the
    approach. Second, since the students were not familiar with
    electronic components, this step proved to be a valuable opportunity
    to engage in discussions about the functioning of the electronic
    components and their role in the system’s operation.</p>
        <p>It is worth mentioning here that our meetings with the students
    were not solely based on discussions. Although we tried our best to
    form a cohort of people (students and instructors/researchers) to
    co-develop the approach, we could not escape from exposition
    entirely. We would begin our meetings with a short presentation to
    the students, followed by mixing instructors with the students. We
    noticed that, despite allowing time for questions after the short
    presentations, most of the questions (and often the more complex
    ones) would rise when instructors and students were sitting at the
    same desk, discussing the subjects of interest. Nevertheless, we
    noticed that the short presentations were valuable to provide the
    foundation for the discussion that would follow.</p>
        <p>We also noticed that the participation of individual students in
    the discussions varied according to the topic. We realized that this
    was simply related to the personal interests of the students, thus,
    for instance, while some students were very interested in the design
    portion of the approach, others were more interested in programming
    the control unit, while others still demonstrated higher interest in
    assembling the system. Although we needed to discuss all the aspects
    of the approach with the whole group, we respected personal choices
    and let the students be free to choose their focus of interest in
    the approach. This also highlights the flexibility of READ approach,
    which can be used beyond renewable energy education, to facilitate
    the learning of subjects such as electronics and computer
    programming.</p>
        <p>Finally, since the electronic parts selection step is relatively
    time-intensive, we suggest that this step is better suited for
    longer courses or interactions. For shorter courses, the educators
    could, for instance, mention the importance of this step to the
    performance of the system and spend more time on the system assembly
    or system testing phases.</p>
        <p>Also, the parts listed in <bold><xref ref-type="table" rid="table-7">Table 1</xref></bold> should be seen as
    a reference; other combinations of electronic components could be
    more appropriate depending on the services that READ systems are
    expected to provide.</p>
      </sec>
      <sec id="enclosure-design-printing-1">
        <title>Enclosure Design &amp; Printing</title>
        <p>This step proved to be another valuable opportunity for
    collective learning and knowledge sharing, although we could not
    develop it entirely with the students due to the limited time we had
    on our weekly meetings (around three-four hours per week during one
    semester). Therefore, the designs were developed by the instructors
    and refined with the entire cohort. Still, the discussions around
    CAD modelling and 3D printing motivated some students to raise
    questions and engage in learning about the materials and methods
    used in this step of READ approach.</p>
        <p>Similar to the previous step, the enclosure design and printing
    phase are recommended for longer interactions since it can be
    expected that a series of iterations (i.e., redesign and
    re-prototyping) are required to improve the models.</p>
      </sec>
      <sec id="system-assembly-system-testing-1">
        <title>System Assembly &amp; System Testing</title>
        <p>
          <bold>
            <xref ref-type="fig" rid="figure-4508">Figure 3</xref>
          </bold> shows a READ device inspired by the firefly
    insect. During the assembly of the devices, the instructor only
    intervened when needed and worked collaboratively with the group
    either by participating in the assembly process or by making
    comments or questions that enabled group thinking on the
    subject.</p>
        <p>Depending on factors such as the educational focus and the age of
    the participants the discussions at this stage of the process can be
    focused on the technical or theoretical aspects of the systems
    (e.g., the system components and their functions or the physics
    behind the components and their interactions). The depth of the
    discussions around the specifics of renewable energy and climate
    change, for instance, should be adjusted according to similar
    criteria. In another example, depending on the goal, the learners
    could actively program the system processing unit, or it could come
    to them pre-programmed. Independent of the depth of discussions or
    the level of complexity around the system assembly, it is crucial to
    engage the audience in the testing of the system, motivating them to
    think critically about the operation of the device.</p>
        <p>We did some relatively simple exercises to test the systems, such
    as testing PV system response to sunlight and the system runtime.
    The latter was conducted by assembling the devices, then completely
    charging their batteries, and leaving them working without any other
    source of power. We also included in our discussions topics such as
    UN sustainable development goals (UN, 2019), to highlight the
    importance of renewable energy in the context of climate change.
    Although this could be done at any (and each) step of the approach,
    we noticed that the conversation was richer once the students
    completed the system assembly.</p>
        <p>Although READ approach was originally envisioned for longer
    interactions, such as a semester-long course, it can be adapted
    according to the audience and time availability. For instance, when
    working on shorter workshops, courses, or even single classes, it is
    possible, for example, to minimize the time spent assembling the
    systems (by pre-assembling the system or parts of it) and focusing
    on the operation of the devices, thus skipping most of the steps of
    the approach while still using the tool to facilitate discussions
    and knowledge sharing.</p>
        <p>We noticed that the most complicated part of this step was the
    construction of the solar panels due to the brittleness of the raw
    solar cells and the delicate tabbing process. Such a complication
    can be avoided by opting for pre-assembled solar panels, without
    compromising the experience.</p>
        <p>Finally, we also noticed that the art component of READ approach
    contributed to disarming people from any fear or negative feeling
    they might have related to the more traditional STEM subjects.
    Therefore, the art and design elements are foundational for making
    READ approach an inclusive educational tool.</p>
      </sec>
    </sec>
    <sec id="conclusions">
      <title>CONCLUSIONS</title>
      <p>This study described the development of READ approach and discussed
  its implementation. The approach was co-created in a university
  setting in the United States by a cohort composed of undergraduate
  students and researchers/instructors. During the semester-long
  intra-actions, the members of the cohort were encouraged to explore
  the various topics being addressed while having the autonomy to focus
  on a certain topic, such as system design or electronics. The hands-on
  experience provided by the approach is likely to facilitate learning
  about renewable energy generation and related subjects.</p>
      <p>READ approach was devised within the context of renewable energy
  and climate change, with an explicit effort to break with the
  aesthetics paradigm as much as possible, playing with forms and
  shapes, to make READ tools resemble the elements found in nature, such
  as the North American flower Laurel, and the firefly insect. By
  explicitly including art and design as crucial to the approach, it is
  anticipated to generate curiosity and invite more participants to the
  act of knowledge creation and sharing.</p>
      <p>Moreover, educators can customize the design according to their
  teaching focus. For instance, one could focus more on the power side,
  using different combinations of lights or batteries to show the effect
  on the system’s performance. One could also use READ to enable
  discussion on energy efficiency and computer programming, exploring
  the intersections with other areas of knowledge. Therefore, READ
  devices are versatile educational tools, in line with the need for
  training professionals versed in renewable energy generation, and who
  can understand the systemic connection between energy and the
  challenges that our society is facing.</p>
      <p>In terms of cost and anticipating that READ devices could be
  adopted by educators located in various countries, where cost might be
  a limiting factor, the device cost was kept as low as possible also
  considering that parts should also be easy to integrate to minimize
  the assembly time.</p>
      <p>In summary, READ approach reached its goal of providing a path for
  renewable energy education through solar-powered educational devices.
  The resulting systems were successfully tested and displayed at a
  local gallery exhibition. READ also was awarded in the International
  Design Competition under the category of Education for Social
  Change.</p>
      <p>Finally, READ approach will continue being tested and refined with
  diverse participant groups for the development of metrics to quantify
  its effectiveness for energy education.</p>
      <p>
        <bold>Author contributions:</bold> All authors contributed
  sufficiently to the study and agreed with the results and
  conclusions.</p>
      <p>
        <bold>Funding:</bold> This study was funded by the Penn State
  Institutes of Energy and the Environment Seed Grant Program with
  additional support from the Penn State student chapter of the American
  Solar Energy Society.</p>
      <p>
        <bold>Ethical statement:</bold> The authors stated that the
  University's Internal Review Board (IRB) acknowledged that the
  conducted activities did not constitute human subjects research.</p>
      <p>
        <bold>Declaration of interest:</bold> No conflict of interest is
  declared by authors.</p>
      <p>
        <bold>Data sharing statement:</bold> Data supporting the findings
  and conclusions are available upon request from the corresponding
  author.</p>
    </sec>
  </body>
  <back>
    <ref-list>
      <title>References</title>
      <ref id="B-408748">
        <title>1</title>
        <mixed-citation>
          <p>Adafruit. (2022). <italic>Adafruit industries–About us</italic>.
<ext-link ext-link-type="uri" xlink:href="https://www.adafruit.com/about">https://www.adafruit.com/about</ext-link></p>
</mixed-citation>
      </ref>
      <ref id="B-408749">
        <title>2</title>
        <mixed-citation>
          <p>Barad, K. M. (2007). <italic>Meeting the universe halfway: Quantum
physics and the entanglement of matter and meaning</italic>. Duke
University Press.
<ext-link ext-link-type="uri" xlink:href="https://doi.org/10.2307/j.ctv12101zq">https://doi.org/10.2307/j.ctv12101zq</ext-link></p>
</mixed-citation>
      </ref>
      <ref id="B-408750">
        <title>3</title>
        <mixed-citation>
          <p>British Museum. (n. d.). <italic>Anemoi/venti</italic>.
<ext-link ext-link-type="uri" xlink:href="https://www.britishmuseum.org/collection/term/BIOG206272">https://www.britishmuseum.org/collection/term/BIOG206272</ext-link></p>
</mixed-citation>
      </ref>
      <ref id="B-408751">
        <title>4</title>
        <mixed-citation>
          <p>Brownson, J. R. S. (2013). <italic>Solar energy conversion
systems</italic>. Academic Press.
<ext-link ext-link-type="uri" xlink:href="https://doi.org/10.1016/B978-0-12-397021-3.00021-1">https://doi.org/10.1016/B978-0-12-397021-3.00021-1</ext-link></p>
</mixed-citation>
      </ref>
      <ref id="B-408752">
        <title>5</title>
        <mixed-citation>
          <p>Chatterton, E. K. (2010). <italic>The history of sailing ships: The
story of their development from the earliest times until the
19<sup>th</sup> century</italic>. Salzwasser-Verlag.</p>
</mixed-citation>
      </ref>
      <ref id="B-408753">
        <title>6</title>
        <mixed-citation>
          <p>Ciriminna, R., Meneguzzo, F., Pecoraino, M., &amp; Pagliaro, M.
(2016). Rethinking solar energy education on the dawn of the solar
economy. <italic>Renewable and Sustainable Energy Reviews,</italic>
<italic>63</italic>, 13-18.
<ext-link ext-link-type="uri" xlink:href="https://doi.org/10.1016/J.RSER.2016.05.008">https://doi.org/10.1016/J.RSER.2016.05.008</ext-link></p>
</mixed-citation>
      </ref>
      <ref id="B-408754">
        <title>7</title>
        <mixed-citation>
          <p>Dale, S. (2023). BP energy outlook 2023 edition. <italic>BP</italic>.
<ext-link ext-link-type="uri" xlink:href="https://bp.com/energyoutlook">https://bp.com/energyoutlook</ext-link></p>
</mixed-citation>
      </ref>
      <ref id="B-408755">
        <title>8</title>
        <mixed-citation>
          <p>Dimitrokali, E., Mackrill, J., Jones, G., Ramachers, Y., &amp; Cain,
R. (2015). Moving away from flat solar panels to PVtrees: Exploring
ideas and people’s perceptions. <italic>Procedia Engineering,</italic>
<italic>118</italic>, 1208-1216.
<ext-link ext-link-type="uri" xlink:href="https://doi.org/10.1016/J.PROENG.2015.08.466">https://doi.org/10.1016/J.PROENG.2015.08.466</ext-link></p>
</mixed-citation>
      </ref>
      <ref id="B-408756">
        <title>9</title>
        <mixed-citation>
          <p>EIA. (2021). <italic>Renewables became the second-most prevalent U.S.
electricity source in 2020–Today in energy</italic>.
<ext-link ext-link-type="uri" xlink:href="https://www.eia.gov/todayinenergy/detail.php?id=48896">https://www.eia.gov/todayinenergy/detail.php?id=48896</ext-link></p>
</mixed-citation>
      </ref>
      <ref id="B-408757">
        <title>10</title>
        <mixed-citation>
          <p>Freire, P. (1967). <italic>Educação como prática da
liberdade</italic> [<italic>Education as the practice of
freedom</italic>]. Paz e Terra [Peace and Earth].</p>
</mixed-citation>
      </ref>
      <ref id="B-408758">
        <title>11</title>
        <mixed-citation>
          <p>Hasnain, S. M., Alawaji, S. H., &amp; Elani, U. A. (1998). Solar
energy education–A viable pathway for sustainable development.
<italic>Renewable Energy,</italic> <italic>14</italic>(1-4), 387-392.
<ext-link ext-link-type="uri" xlink:href="https://doi.org/10.1016/S0960-1481(98)00094-9">https://doi.org/10.1016/S0960-1481(98)00094-9</ext-link></p>
</mixed-citation>
      </ref>
      <ref id="B-408759">
        <title>12</title>
        <mixed-citation>
          <p>Haury, D. L., &amp; Rillero, P. (1994). <italic>Perspectives of
hands-on science teaching.</italic> ERIC Clearinghouse for Science,
Mathematics and Environmental Education.</p>
</mixed-citation>
      </ref>
      <ref id="B-408760">
        <title>13</title>
        <mixed-citation>
          <p>IEA. (2022). Energy statistics data browser. <italic>IEA</italic>.
<ext-link ext-link-type="uri" xlink:href="https://www.iea.org/data-and-statistics/data-tools/energy-statistics-data-browser">https://www.iea.org/data-and-statistics/data-tools/energy-statistics-data-browser</ext-link></p>
</mixed-citation>
      </ref>
      <ref id="B-408761">
        <title>14</title>
        <mixed-citation>
          <p>IPCC. (2022). <italic>Summary for policymakers</italic>. Cambridge
University Press.
<ext-link ext-link-type="uri" xlink:href="https://doi.org/10.1017/9781009157926.001">https://doi.org/10.1017/9781009157926.001</ext-link></p>
</mixed-citation>
      </ref>
      <ref id="B-408762">
        <title>15</title>
        <mixed-citation>
          <p>Jorgenson, S. N., Stephens, J. C., &amp; White, B. (2019). Jorgenson,
S. N., Stephens, J. C., &amp; White, B. (2019). Environmental education
in transition: A critical review of recent research on climate change
and energy education. <italic>The Journal of Environmental
Education,</italic> 50(3), 160-171.
<ext-link ext-link-type="uri" xlink:href="https://doi.org/10.1080/00958964.2019.1604478">https://doi.org/10.1080/00958964.2019.1604478</ext-link></p>
</mixed-citation>
      </ref>
      <ref id="B-408763">
        <title>16</title>
        <mixed-citation>
          <p>Kandpal, T. C., &amp; Broman, L. (2014). Renewable energy education:
A global status review. <italic>Renewable and Sustainable Energy
Reviews,</italic> <italic>34</italic>, 300-324.
<ext-link ext-link-type="uri" xlink:href="https://doi.org/10.1016/J.RSER.2014.02.039">https://doi.org/10.1016/J.RSER.2014.02.039</ext-link></p>
</mixed-citation>
      </ref>
      <ref id="B-408764">
        <title>17</title>
        <mixed-citation>
          <p>Kishore, P., &amp; Kisiel, J. (2013). Exploring high school students’
perceptions of solar energy and solar cells. <italic>International
Journal of Environmental &amp; Science Education,</italic>
<italic>8</italic>, 521-534.</p>
</mixed-citation>
      </ref>
      <ref id="B-408765">
        <title>18</title>
        <mixed-citation>
          <p>Longino, H. E. (1990). <italic>Science as social knowledge: Values
and objectivity in scientific inquiry</italic>. Princeton University
Press.
<ext-link ext-link-type="uri" xlink:href="https://doi.org/10.1515/9780691209753">https://doi.org/10.1515/9780691209753</ext-link></p>
</mixed-citation>
      </ref>
      <ref id="B-408766">
        <title>19</title>
        <mixed-citation>
          <p>Lord, B. (2014). <italic>Art &amp; energy: How culture
changes</italic>. The AAM Press of the American Alliance of Museums.</p>
</mixed-citation>
      </ref>
      <ref id="B-408767">
        <title>20</title>
        <mixed-citation>
          <p>Lowan-Trudeau, G., &amp; Fowler, T. A. (2022). Towards a theory of
critical energy literacy: The youth strike for climate, renewable energy
and beyond. <italic>Australian Journal of Environmental
Education,</italic> <italic>38</italic>(1), 58-68.
<ext-link ext-link-type="uri" xlink:href="https://doi.org/10.1017/AEE.2021.15">https://doi.org/10.1017/AEE.2021.15</ext-link></p>
</mixed-citation>
      </ref>
      <ref id="B-408768">
        <title>21</title>
        <mixed-citation>
          <p>Marchant, J. (2016). A journey to the oldest cave paintings in the
world. <italic>Smithsonian Magazine</italic>.
<ext-link ext-link-type="uri" xlink:href="https://www.smithsonianmag.com/history/journey-oldest-cave-paintings-world-180957685/">https://www.smithsonianmag.com/history/journey-oldest-cave-paintings-world-180957685/</ext-link></p>
</mixed-citation>
      </ref>
      <ref id="B-408769">
        <title>22</title>
        <mixed-citation>
          <p>Mylonas, G., Amaxilatis, D., Pocero, L., Markelis, I., Hofstaetter,
J., &amp; Koulouris, P. (2019). An educational IoT lab kit and tools for
energy awareness in European schools. <italic>International Journal of
Child-Computer Interaction, 20</italic>, 43-53.
<ext-link ext-link-type="uri" xlink:href="https://doi.org/10.1016/J.IJCCI.2019.03.003">https://doi.org/10.1016/J.IJCCI.2019.03.003</ext-link></p>
</mixed-citation>
      </ref>
      <ref id="B-408770">
        <title>23</title>
        <mixed-citation>
          <p>Negro, S. O., Alkemade, F., &amp; Hekkert, M. P. (2012). Why does
renewable energy diffuse so slowly? A review of innovation system
problems. <italic>Renewable and Sustainable Energy Reviews,</italic>
<italic>16</italic>(6), 3836-3846.
<ext-link ext-link-type="uri" xlink:href="https://doi.org/10.1016/J.RSER.2012.03.043">https://doi.org/10.1016/J.RSER.2012.03.043</ext-link></p>
</mixed-citation>
      </ref>
      <ref id="B-408771">
        <title>24</title>
        <mixed-citation>
          <p>Ornes, S. (2018). Core concept: How does climate change influence
extreme weather? Impact attribution research seeks answers.
<italic>Proceedings of the National Academy of Sciences,
115</italic>(33), 8232-8235.
<ext-link ext-link-type="uri" xlink:href="https://doi.org/10.1073/PNAS.1811393115">https://doi.org/10.1073/PNAS.1811393115</ext-link></p>
</mixed-citation>
      </ref>
      <ref id="B-408772">
        <title>25</title>
        <mixed-citation>
          <p>Pyne, S. J. (2012). <italic>Fire: Nature and culture</italic>.
Reaktion Books.</p>
</mixed-citation>
      </ref>
      <ref id="B-408773">
        <title>26</title>
        <mixed-citation>
          <p>Rai, V., &amp; Beck, A. L. (2015). Public perceptions and information
gaps in solar energy in Texas. <italic>Environmental Research
Letters,</italic> <italic>10</italic>(7), 074011.
<ext-link ext-link-type="uri" xlink:href="https://doi.org/10.1088/1748-9326/10/7/074011">https://doi.org/10.1088/1748-9326/10/7/074011</ext-link></p>
</mixed-citation>
      </ref>
      <ref id="B-408774">
        <title>27</title>
        <mixed-citation>
          <p>Rautio, P., Hohti, R., Tammi, T., &amp; Ylirisku, H. (2022). Multiple
worlds and strange objects: Environmental education research as an
additive practice. <italic>Australian Journal of Environmental
Education, 38</italic>(3-4), 214-226. <italic></italic>
<ext-link ext-link-type="uri" xlink:href="https://doi.org/10.1017/AEE.2022.29">https://doi.org/10.1017/AEE.2022.29</ext-link></p>
</mixed-citation>
      </ref>
      <ref id="B-408775">
        <title>28</title>
        <mixed-citation>
          <p>REN21. (2022). Renewables 2022 global status report. <italic>REN21
Secretariat</italic>.
<ext-link ext-link-type="uri" xlink:href="https://www.ren21.net/wp-content/uploads/2019/05/GSR2022_Full_Report.pdf">https://www.ren21.net/wp-content/uploads/2019/05/GSR2022_Full_Report.pdf</ext-link></p>
</mixed-citation>
      </ref>
      <ref id="B-408776">
        <title>29</title>
        <mixed-citation>
          <p>Schiermeier, Q. (2018). Droughts, heatwaves and floods: How to tell
when climate change is to blame. <italic>Nature</italic>.
<ext-link ext-link-type="uri" xlink:href="https://doi.org/10.1038/d41586-018-05849-9">https://doi.org/10.1038/d41586-018-05849-9</ext-link></p>
</mixed-citation>
      </ref>
      <ref id="B-408777">
        <title>30</title>
        <mixed-citation>
          <p>Serdeczny, O., Adams, S., Baarsch, F., Coumou, D., Robinson, A.,
Hare, W., Schaeffer, M., Perrette, M., &amp; Reinhardt, J. (2017).
Climate change impacts in sub-Saharan Africa: From physical changes to
their social repercussions. <italic>Regional Environmental
Change,</italic> <italic>17</italic>(6), 1585-1600.
<ext-link ext-link-type="uri" xlink:href="https://doi.org/10.1007/s10113-015-0910-2">https://doi.org/10.1007/s10113-015-0910-2</ext-link></p>
</mixed-citation>
      </ref>
      <ref id="B-408778">
        <title>31</title>
        <mixed-citation>
          <p>Sullivan, J. (2021). JMW Turner’s energy transition. <italic>Artists
&amp; Climate Change</italic>.
<ext-link ext-link-type="uri" xlink:href="https://artistsandclimatechange.com/2021/02/25/jmw-turners-energy-transition/">https://artistsandclimatechange.com/2021/02/25/jmw-turners-energy-transition/</ext-link></p>
</mixed-citation>
      </ref>
      <ref id="B-408779">
        <title>32</title>
        <mixed-citation>
          <p>UN. (2019). Sustainable development goals. <italic>United
Nations</italic>.
<ext-link ext-link-type="uri" xlink:href="https://www.undp.org/sustainable-development-goals">https://www.undp.org/sustainable-development-goals</ext-link></p>
</mixed-citation>
      </ref>
      <ref id="B-408780">
        <title>33</title>
        <mixed-citation>
          <p>van der Horst, D. (2007). NIMBY or not? Exploring the relevance of
location and the politics of voiced opinions in renewable energy siting
controversies. <italic>Energy Policy, 35</italic>(5), 2705-2714.
<ext-link ext-link-type="uri" xlink:href="https://doi.org/10.1016/J.ENPOL.2006.12.012">https://doi.org/10.1016/J.ENPOL.2006.12.012</ext-link></p>
</mixed-citation>
      </ref>
      <ref id="B-408781">
        <title>34</title>
        <mixed-citation>
          <p>Wasson, C. S. (2015). <italic>System engineering analysis, design,
and development: Concepts, principles</italic>. John Wiley &amp;
Sons.</p>
</mixed-citation>
      </ref>
      <ref id="B-408782">
        <title>35</title>
        <mixed-citation>
          <p>White, L. A. (1943). Energy and the evolution of culture.
<italic>American Anthropologist,</italic> <italic>45</italic>(3),
335-356.
<ext-link ext-link-type="uri" xlink:href="https://doi.org/10.1525/AA.1943.45.3.02A00010">https://doi.org/10.1525/AA.1943.45.3.02A00010</ext-link></p>
</mixed-citation>
      </ref>
      <ref id="B-408783">
        <title>36</title>
        <mixed-citation>
          <p>Wrigley, E. A. (2013). Energy and the English industrial revolution.
<italic>Philosophical Transactions of the Royal Society A: Mathematical,
Physical and Engineering Sciences</italic>, <italic>371</italic>(1986).
<ext-link ext-link-type="uri" xlink:href="https://doi.org/10.1098/RSTA.2011.0568">https://doi.org/10.1098/RSTA.2011.0568</ext-link></p>
</mixed-citation>
      </ref>
    </ref-list>
    <sec sec-type="display-objects">
      <title>Figures and Tables</title>
      <fig id="figure-4506">
        <label>Figure 1</label>
        <caption>
          <p>READ approach (Source: Authors’ own elaboration)</p>
</caption>
        <graphic xlink:href="https://www.ijese.com/figures/4506/figure1.png" />
      </fig>
      <fig id="figure-4507">
        <label>Figure 2</label>
        <caption>
          <p>READ concept of operations (system remains flexible, other services
can be incorporated later, if needed) (Source: Authors’ own
elaboration)</p>
</caption>
        <graphic xlink:href="https://www.ijese.com/figures/4507/figure2.png" />
      </fig>
      <fig id="figure-4508">
        <label>Figure 3</label>
        <caption>
          <p>A READ device inspired by firefly insect being tested in a low-light
environment (Picture taken by Paulo Soares)</p>
</caption>
        <graphic xlink:href="https://www.ijese.com/figures/4508/figure3.png" />
      </fig>
      <table-wrap id="table-7">
        <label>Table 1</label>
        <caption>List of electronic components used in READ models</caption>
        <table>
          <tbody>
            <tr>
              <td>
                <p>
                  <bold>Function</bold>
                </p>
              </td>
              <td>
                <p>
                  <bold>Component</bold>
                </p>
              </td>
              <td>
                <p>
                  <bold>Function</bold>
                </p>
              </td>
              <td>
                <p>
                  <bold>Component</bold>
                </p>
              </td>
            </tr>
            <tr>
              <td>
                <p>Power source</p>
              </td>
              <td>
                <p>0.5 V-400 mA solar photovoltaic cells</p>
              </td>
              <td>
                <p>Control unit</p>
              </td>
              <td>
                <p>Adafruit gemma M0</p>
              </td>
            </tr>
            <tr>
              <td>
                <p>Energy storage</p>
              </td>
              <td>
                <p>Lithium batteries: 3.7 V &amp; 500 mAh</p>
              </td>
              <td>
                <p>Light</p>
              </td>
              <td>
                <p>Adafruit mini LED light</p>
              </td>
            </tr>
            <tr>
              <td>
                <p>Change controller</p>
              </td>
              <td>
                <p>Solar battery charger</p>
              </td>
              <td>
                <p>Sensor</p>
              </td>
              <td>
                <p>Light sensor-</p>
              </td>
            </tr>
          </tbody>
        </table>
      </table-wrap>
    </sec>
  </back>
</article>